Our HVAC repair planning estimates
For common heating and cooling repairs, an approximate planning budget is $150–$2,000. Major compressor or coil work can exceed that range. The component examples below help distinguish a smaller repair from a larger equipment decision.
| Cooling repair | Approximate planning estimate |
|---|---|
| Capacitor replacement | $100–$400 |
| Fan motor repair or replacement | $200–$700 |
| Compressor replacement | $900–$3,000 |
| Evaporator-coil replacement | $1,000–$5,000+ |
The component ranges describe different repairs and may fall outside the broad common-repair budget. They account for typical component and labor needs; the final estimate follows diagnosis.
Diagnosis identifies what needs repair
Warm air, an indoor leak and a system that never starts can have different causes. A running indoor fan does not establish that the cooling circuit works. Heating can fail through ignition, controls, circulation or airflow, depending on the equipment.
What changes the total?
Component type, refrigerant recovery and charging, leak repairs, warranty status and access to equipment affect the work. A drain obstruction is different from a damaged coil even when both leave water indoors. Related faults should be identified so the repair addresses more than the visible symptom.
Understand the complete repair
The written estimate should identify the diagnosed fault, parts, labor and testing. Diagnostic charges may be separate or included in the proposed repair. For furnace-specific components, see our furnace repair estimates.
A major repair or a new system?
A limited fault can be worth repairing when connected equipment is sound. Recurring failures or a large component defect may justify comparing replacement. New equipment can still require duct, electrical or control work, so compare the complete installation rather than a loose equipment price.




